FEYNLAB® PLASTIC

Application Instructions:

Before application, place the vehicle in a well-lit environment at a controlled temperature of 50°F-85°F (10°C-30°C) and free from contamination. Lower humidity is preferable.

• Shake the bottle well before use.
• Using a microfiber applicator, apply a small amount of PLASTIC V2 and work it onto the surface. The product amount should be sufficient to evenly cover the area without oversaturation.
• Allow PLASTIC to penetrate and settle for 5 to 10 minutes or apply as needed within this timeframe. After 5 minutes, return to the starting point of application, buff the surface, and remove excess product.
• For multiple layers: Allow the application to cure for at least 12 to 24 hours (or overnight) between additional coats.

Note: The required amount of product may vary based on the overall composition of the plastic trim type and its initial condition. Heavily oxidized and faded trim may require more product for restoration. For extremely faded black plastics, consider using FEYNLAB® PLASTIC BLACK. Once PLASTIC V2 is fully cured, it can be topped with OVERCOAT for additional protection and hydrophobic properties.