Name: FEYNLAB® THE ORIGINAL CERAMIC COATING
SKU: FEYNORI
Price: 79.00 CAD
Availability: InStock

FEYNLAB® THE ORIGINAL CERAMIC COATING

$79.00

The ORIGINAL Ceramic is an easy to use, durable, slick, hydrophobic paint coating providing a high level of gloss to enhance any vehicle.

It is extremely simple to apply with superb durability proven by 60,000+ real world client vehicle installations.

Application Instructions:

Apply enough ORIGINAL Ceramic to a microfiber applicator to fully cover a single panel such as a door or half a hood.
Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
Next, fill in the framed area with slightly overlapping horizontal (left to right) straight lines over the entire panel. After, switch to vertical overlapping lines. This cross-hatching pattern ensures even application.
Due to its user friendliness, ORIGINAL Ceramic may be applied to the entire vehicle before removal.
After application, step back and look for any areas missed or those with excess product. If found, smooth out evenly with the applicator sponge. This will ensure even drying across the panel and minimize excess product usage.
Allow ORIGINAL Ceramic to dwell on the panel a minimum of 15-20 min, until it is about 75% dry. Dwell time may vary depending on humidity and temperature. * Humid Climates 75%+ = Shorter Dwell time.
To test removal readiness: lightly swipe a small spot with a gloved finger. If the swipe reveals a clean trail then remove. If the swipe smears then allow it to dwell longer. Repeat swipe test again in 2-5 min increments to determine wipe times.
Wipe off ORIGINAL Ceramic following same pattern of application, using two clean MF towels. Towel A (left hand) will remove the majority of coating residue. Towel B (right hand) will remove any remaining residue, revealing a crystal clear surface.

FEYNLAB® THE ORIGINAL CERAMIC COATING